Skip links

Sticker application

When ordering vinyl stickers on the Scöff Art© website, you may receive two types of stickers. The first and simplest are applied in the conventional way; you remove and apply. The second are vinyl decals cut to the shape of the desired design. You will receive it “sandwiched” between the shipping carton and the transparent transfer film that helps with the application of the design. For best results with these, we recommend that you follow the instructions below:

1- make sure you have a smooth target surface and clean it with a window washer to keep it clean.

2- place your self-adhesive vinyl decal on a flat surface and lightly rub your visual with a plastic card (a credit card for example). This will facilitate the next steps.

3- carefully remove the card stock from the vinyl and clear film. You should only be left with the transparent sheet on which your visual is still glued. If small parts of your visual do not come off the vinyl holder, you can rub the affected part with your plastic card again and then remove the cardboard holder again.

4- place your sticker on the surface prepared in step #1 and rub your visual again with your plastic card. This will allow a better adhesion of your vinyl to your surface.

5- carefully remove the transparent film. Take care, if some elements of your visual remain stuck to the film, you can rub your visual again with your plastic card and carefully remove the transparent film again.

If you wish, you can varnish your self-adhesive vinyl after it has been applied. For this, we advise you to use an acrylic varnish, preferably an aerosol type varnish. With practice and by following these instructions, you should be able to achieve an impeccable result.

If you have any questions or comments about our stickers, please contact